Before You Buy a Shipping Container: Site and Delivery Checklist
A few checks before ordering save the most common headaches. Run through this list before your container arrives.
1. Site preparation
- Level ground: The container must sit level or the doors will not close properly. Concrete pads, gravel beds or railroad ties all work.
- Drainage: Avoid low spots where water pools under the unit.
- Clearance: Leave room around the container for door swing and maintenance access.
2. Truck access
- Path width: We must have 10–12 feet of clear width throughout the pathway to the final delivery site, and all obstacles, stumps, and large rocks removed from the ground.
- Height clearance: We must have 14–16 feet of height clearance. Make sure there are no low-hanging obstacles like tree branches, electrical lines, or phone lines.
- Sharp turns: Drivers might struggle on sharp turns. Bring any sharp turns to our attention prior to confirming the delivery date — we may request additional information via picture or video.
- Ground firmness: The truck is heavy — soft ground, fresh asphalt or septic areas can be a problem.
- Off road: If the driver agrees to go off road, please be advised that it is at your request. If a truck gets stuck, you could be responsible for additional expenses, including but not limited to towing or wrecker services, the driver's hourly rate, and layover fees.
3. Permits and rules
- Local zoning: Some cities and HOAs restrict container placement or require a permit. Check with your local planning office before ordering.
- Duration: Rules often differ for temporary vs permanent placement.
4. Delivery arrangement
- Tilt-bed delivery: Most of our customers don't have a forklift, so delivery is made by tilt-bed truck through local hauling partners we work with. The truck sets the container down on the ground where you want it.
- Delivery can be arranged: Provide your delivery address and we will quote freight by distance.
- Be on site: Someone should be present to confirm placement when the truck arrives.
- More detail: Full delivery requirements are also listed in our FAQ.
5. On arrival — quick checks
- Doors: Open and close both doors fully.
- Seals: Look for daylight through the roof or walls.
- Floor: Check for soft spots or damage.
- Exterior: Note any dents or rust beyond what the grade describes.